METHOD FOR CHECKING FOR LOOSENESS OF ENGINE HIGH-PRESSURE PIP-
ING CLAMP, HARDENING OF RUBBER
Check clamps (1) to (14) visually and with your fingers that there are no loose bolts or hardening of the rubber.
If there is any loose bolt or hardened rubber, ask your Komatsu distributor for replacement.
METHOD FOR CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP,
HARDENING OF RUBBER
Check for any missing fuel spray prevention caps (1) to (10) or fuel spray prevention cover (11), and check also
for any hardened rubber portions.
If there are any missing caps or cover or the rubber is hardened, ask your Komatsu distributor for installation or
replacement.
MAINTENANCE MAINTENANCE PROCEDURE
4-83
To Next Page
Loading...
