• Check oil level in engine oil pan, add oil
• Check electric wiring
• Check fuel level, add fuel
• Check DEF level, add DEF
• Check tire pressure
• Check centralized warning lamp, alarm buzzer, pilot lamps, and meters
• Check brake
• Check secondary steering
• Check manual secondary steering
• Check automatic secondary steering
• Check backup alarm operation
• Check horn operation
EVERY 50 HOURS MAINTENANCE
METHOD FOR LUBRICATING
1.
Stop the engine.
2.
By using a grease pump, pump in grease through the grease fittings.
3.
Check visually that the greasing has been performed properly.
4.
After greasing, wipe off any old grease that is pushed out.
Perform the greasing work every day when operating in places where the grease flows out easily, such as when
traveling through mud or water.
Front suspension (left) (2 places)
Front suspension (right) (2 places)
MAINTENANCE PROCEDURE MAINTENANCE
4-36
To Next Page
Loading...
