00 Index and foreword SEN00172-03
114E-3 Series
35
8. Table of tightening torques for 102, 107 and 114 engine series (Taper screws)
a Unless there are special instructions, tighten the taper screws (unit: inch) of the 102, 107 and 114
engine series to the torque below.
Thread size Tightening torque
inch Nm kgm
1/16 3 ± 1 0.31 ± 0.10
1/8 8 ± 2 0.81 ± 0.20
1/4 12 ± 2 1.22 ± 0.20
3/8 15 ± 2 1.53 ± 0.20
1/2 24 ± 4 2.45 ± 0.41
3/4 36 ± 5 3.67 ± 0.51
1 60 ± 9 6.12 ± 0.92
To Next Page
Loading...
