5
Making Copies
5-14
X/Y Zoom
This setting allows you to enter the zoom ratio for X and Y independently
from the Key Pad.
1
Position the original.
❍
Original Loading (p. 4-1)
2
Press the [X/Y ZOOM] key on the
control panel to light the X/Y ZOOM
indicator.
3
Press the [CLEAR] key to clear the
old value for X (length).
4
First, enter the zoom ratio (%) for X
(length) from the Key Pad and then
press the [ENTER] key.
?
Do you know the range for the
value X in X/Y Zoom?
➜
The ratio can range from 50% to
100%.
?
Do you want to change the value just entered?
➜
Press the [CLEAR] key and then re-enter the new value.
?
What happens when a value outside the specified range is
entered?
➜
The Display shows “Err.” Press
the [CLEAR] key and re-enter a
new value that falls within the
range.
Y (width)
X
(length)
Konica7115_7118.book Page 14 Tuesday, October 16, 2001 10:51 AM
To Next Page
Loading...
