bizhub 501/421/361 (Version 2) 5-53
Transmitting data
5
Front Cover
% Select this setting to scan the first page as the front cover.
Front + Back Covers
% Select this setting to scan the first page as the front cover, the second page as the back cover, and the
remaining pages as the body.
Book Erase - Frame Erase
% Select this setting to specify frame erasing for page spreads.
– To erase the same width on all sides, touch [Frame], and then specify a value (range: 1/16 to 2
inches (0.1 to 50.0 mm)).
– To specify different widths for the top, left, right, and bottom, touch the button for the desired
location, and then specify a value.
– To cancel frame erasing, touch [No].
!
Detail
If a width to be erased around the original is specified with "Frame Erase" in the Book Copy screen, the
same settings are also applied to "Frame Erase" in the Frame Erase screen.
Binding Position
% If "Separation", "Front Cover", or "Front + Back Covers" was selected, touch [Binding Position], and
then select the binding position.
To Next Page
Loading...
Need help?
General
