501/421/361 6-9
Copy paper/originals
6
6.2 Selecting the Paper settings for bypass tray
This section describes the procedures for specifying the size and type of paper loaded in bypass tray.
!
Detail
For details on loading the paper into the bypass tray, refer to "Loading paper into the bypass tray"
on page 1-51.
6.2.1 Automatically detecting the paper size ("Auto Detect" setting)
The size of the paper loaded into bypass tray can be detected automatically.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General
