What to do if Konica Minolta Bizhub 362 All in One Printer is showing error EF09CD?
If your Konica Minolta All in One Printer displays error EF09CD, it indicates that available memory is not sufficient. To resolve this, expand the memory of this machine.
What to do if Konica Minolta Bizhub 362 is showing error ED09C8?
If your Konica Minolta All in One Printer displays error ED09C8, it means that the specified folder does not exist. Verify that the save destination folder exists and that you have entered the folder name correctly.
What to do if Konica Minolta Bizhub 362 All in One Printer is showing error ED09C7?
If your Konica Minolta All in One Printer shows error ED09C7, it means the user name or password you entered is incorrect. Double-check and correct the user name and password.
What to do if Konica Minolta Bizhub 362 All in One Printer is showing error ED09C6?
If your Konica Minolta All in One Printer displays error code ED09C6, it indicates that the LAN cable is either not connected or the destination address is incorrect. To resolve this, check that the LAN cable is correctly connected. Also, verify that the settings for the FTP server address, port number, and proxy server are correctly specified.
What to do if Konica Minolta All in One Printer shows "Malfunction detected"?
If the message "Malfunction detected" appears on your Konica Minolta All in One Printer, follow these steps: 1. Write down the malfunction code (e.g., C-0001) from the call technical representative screen. 2. Turn the machine off using the [Power] (auxiliary power) key and the main power switch. 3. Unplug the machine. 4. Contact your technical representative and provide them with the malfunction code.
What to do if Konica Minolta All in One Printer shows 'No response'?
If your Konica Minolta All in One Printer is showing 'No response' when trying to communicate with the Center, it indicates that the Center isn't responding. You can try the following: * Communicate with the Center again. * Check the communication environment of the Center side.
How to troubleshoot transmission problems on Konica Minolta All in One Printer?
To troubleshoot transmission issues on your Konica Minolta All in One Printer, start by checking the LED indicator on the hub and verifying the connections. If large image data is causing timeouts, increase the timeout setting on the receiving end or reduce the image data size. Ensure all necessary network settings are specified. Replace the LAN cable to rule out damage. If IP filtering is in place, consult with the machine's administrator. For other problems, check the Job List screen for error details and consult the error codes table.
Why is transmission not possible on Konica Minolta All in One Printer?
General| Brand | Konica Minolta |
|---|---|
| Model | Bizhub 362 |
| Category | All in One Printer |
| Language | English |
Explains the process of connecting the machine to a LAN using a TCP/IP protocol and a LAN cable.
Details how to specify network settings based on the LAN environment for various operations.
Covers basic network settings like DHCP, IP Address, Subnet Mask, Gateway, and Network Board Set.
Covers SMTP settings required for Scan to E-Mail, Internet fax, and E-Mail notification functions.
Explains POP3 settings necessary for receiving Internet faxes, including server address, user name, and password.
Explains how to transmit data by touching one-touch dial buttons after registering destinations or mail programs.
Details how to specify scanning quality (resolution) and density for scanned documents.
Explains how to program one-touch dial buttons for main and secondary destinations.
Describes transmitting data via one-touch dial buttons for FTP upload destinations or mail programs.
Details how to specify scan quality (resolution) and density for documents sent via FTP.
Explains how to program one-touch dial buttons for FTP destinations, specifying server address, port, and user credentials.
Describes transmitting data via one-touch dial buttons for SMB shared folder destinations.
Details how to specify scan quality (resolution) and density for documents sent via SMB.
Explains how to program one-touch dial buttons for SMB destinations, specifying host address, directory, user name, and password.
Describes transmitting data via one-touch dial buttons for Internet fax destinations.
Details how to specify scan quality (resolution) and density for documents sent via Internet fax.
Explains how to program one-touch dial buttons for Internet fax destinations, including secondary recipients.
Describes how to search for destination information from an LDAP server using basic and detail search methods.
Explains how to register LDAP search results as one-touch dial destinations on the machine.
Guides on registering one-touch dial destinations for various communication modes (Email, FTP, Internet FAX, SMB).
Explains how to register fax programs, including scan settings and multiple recipients, as one-touch dial destinations.
Allows specifying default settings for transmission operations like quality, density, communication mode, and TSI.
Details how to specify the time and day for printing received Internet faxes, including Memory Lock Password.
Covers specifying required TCP/IP network settings, including DHCP, IP Address, Subnet Mask, Gateway, and DNS.
Details how to register LDAP server information, including name, address, port, and authentication settings.
Covers specifying transmission settings for E-Mail and Internet FAX, including POP3, SMTP, and security functions.
Explains how to specify SSL/TLS settings to encrypt communication and protect information like passwords.
Allows specifying default settings for transmission operations, including quality, density, communication mode, and TSI.
To Next Page
