3
Before making copies
3-54 bizhub 750/600 (Phase 2)
3.8 Loading paper of a different size into paper trays
The paper loaded into the tray 3 and 4 can be changed to that of a different
size.
2
Note
To load paper of a different size into the tray 1 and 2 and the LCU (LU-
401/LU-402), contact your technical representative.
Changing the size of paper that is loaded
1 Pull out the paper tray for the tray 3 or 4.
2 Raise the paper take-up roller.
3 Remove the trailing-edge guide, and then insert it at the position for the
desired paper size.
– Press the button to remove the
trailing-edge guide.
– Insert the trailing-edge guide into
the hole corresponding to the
size indicated on the bottom
plate.
To Next Page
General
