Utility
13
bizhub 750/600 (Phase 2) 13-69
Adjusting the half-fold position
The half-fold position when printing with the "Half Fold" function can be
adjusted.
0 Use the "Half Fold" function to print a single sample copy, and then
perform the adjustment while checking the sample that was created.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the administrator setting screen" on page 13-60.
2 Touch [1 System Setting].
The System Setting screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [5 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [2 Half-Fold Position].
The Half-Fold Position screen appears.
6 Touch the button for the paper size to be set.
7 Touch [Test Copy].
The Test Copy screen appears.
8 Press the [Start] key.
The test pattern is printed.
To Next Page
General
