Konica Minolta bizhub 750 User Manual

Additional copy operations
5
bizhub 750/600 (Phase 2) 5-17
5.5 Copying with programmed copy settings (Mode
Memory)
To recall a stored job
Programmed copy settings can be recalled to be used again for copying.
1 Position the original to be copied. (For details, refer to page 4-9.)
2 Press the [Mode Memory] key.
The Recall Copy Program screen
appears.
3 Touch the button for the copy program registered with the desired
copy settings.
– If the copy settings in the selected copy program are not to be
checked, skip to step 8.

Konica Minolta bizhub 750 Specifications

General

Brand	Konica Minolta
Model	bizhub 750
Category	All in One Printer
Language	English