12
Managing jobs (Job list)
12-12 bizhub 750/600 (Phase 2)
To check the job details
1 In the Basic screen, touch [Job List].
The Job List screen appears.
2 Display the list containing the job whose details are to be checked.
3 Select the job whose details are to be checked, and then touch [Detail].
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.
The Check Detail screen appears.
4 After the desired information has been checked, touch [Close] or [Exit]
or press the [Reset] key.
– To return to the Job List screen, touch [Close].
– To return to the Basic screen, touch [Exit] or press the [Reset] key.
To Next Page
General
