Konica Minolta BIZHUB C351 User Manual

Specifying settings from the control panel
4
bizhub C351 (Phase3) 4-69
4.12 NetWare settings
The settings for using the machine on a NetWare network can be specified.
NetWare parameters
The NetWare settings are as follows:
NetWare Setting screen 1/5
NetWare Setting screen 2/5
NetWare Setting screen 3/5
Item Description
IPX Setting Specify whether to use IPX.
Ethernet Frame Type Sets the frame type that is used for communications.
Authentication System When [ON (External Server)] was selected in "User Authen-
tication", specify whether to allow NDS authentication.
Item Description
NetWare Print Mode Select the print mode to be used.
Status The NetWare status can be verified. For details on specify-
ing the setting, refer to "Status" on page 4-74.
Item Description
Print Server Name Sets the printer server name. Use the keyboard that ap-
pears in the touch panel to type in the server name (up to
63 characters).
Print Server Password Sets the password that is required when the print server
logs in to the file server. Use the keyboard that appears in
the touch panel to type in the password (up to 63 charac-
ters).
Polling Interval Sets the interval for searching the print queue. To change
the interval, press the [C] (clear) key, and then use the key-
pad to type in the value (between 1 and 65535).
NDS/Bindery Setting If bindery is disabled, only NDS is enabled. If bindery is en-
abled, both NDS and bindery are enabled.

Konica Minolta BIZHUB C351 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Size	11 x 17 inches
Scanner Type	Color Flatbed Scanner
Connectivity	Ethernet, USB