4
Specifying settings from the control panel
4-136 bizhub C351 (Phase3)
4.26 PING confirmation
Settings for checking the TCP/IP network using PING can be specified.
PING confirmation parameters
The PING Confirmation parameters are as follows:
To specify PING confirmation settings
1 In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 4-10 for more details.)
2 In the Network Setting screen, touch [9 Detail Setting].
3 In the Detail Setting screen, touch [5 PING Confirmation].
The PING Confirmation screen appears.
4 Specify the desired settings.
Item Description
PING TX Address Sets the host address of the device to ping.
For details on specifying the settings, refer to "PING TX ad-
dress" on page 4-138.
Check Connection Sends a ping to check the connection.