Konica Minolta BIZHUB C351 User Manual

Specifying settings from the control panel
4
bizhub C351 (Phase3) 4-105
4.19 Search default setting
You can specify the LDAP server that is to perform searches by priority from
the registered LDAP servers.
To specify the detect default server settings
1 In the Administrator Setting screen, touch [5 Network Setting].
2 In the Network Setting screen, touch [7 LDAP Setting].
3 In the LDAP Setting screen, touch [3 Search Default Setting].
The Detect Default Setting screen appears.
4 Select the LDAP server that is to perform searches by priority.
5 Touch [OK].
2
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.

Konica Minolta BIZHUB C351 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Size	11 x 17 inches
Scanner Type	Color Flatbed Scanner
Connectivity	Ethernet, USB