Specifying settings Using PageScope Web Connection
5
bizhub C351 (Phase3) 5-113
5.29 E-mail setting
E-mail RX (POP)
You can specify the settings to perform the authentication of the e-mail
sender with POP Before SMTP.
Item Description
E-Mail RX Setting Specify whether to use the e-mail reception setting.
POP Server Address Enter the receiving POP server address (syntax: "***.***.***.***"
or FQDN where the input range of *** is 0 to 255). When enter-
ing the host name, select the "Please check to enter host
name." check box.
Login Name Enter the user name used to log on to the POP server (up to
63 characters).
Password Enter the password for logging on to the POP server (up to 15
alphanumeric characters).
APOP Authentication Enables/disables APOP authentication.
Connection Timeout Specify the connection timeout of the server (input range: 30
to 300 seconds).
Port No. Enter the server port number (input range: 1 to 65535).
To Next Page
Loading...
Need help?
General
