Konica Minolta BIZHUB C351 User Manual

Specifying settings from the control panel
4
bizhub C351 (Phase3) 4-125
NTP server address
The IP address of the NTP server can be specified.
1 In the Time Adjustment Setting, touch [Host Address].
The Host Address screen appears.
2 Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
3 Enter the host address (IP address or host name (up to 255
characters)).
– To edit the values that you entered with "IP Address Input", touch
[
] or [ ] to move the cursor to the desired area, touch [Delete],
and enter the new value.
– To clear all values, press the [C] (clear) key.
– If the host address exceeds 81 characters, touch [Details] to display
the Host Address Detail screen with the rest of the host addresses.
4 Touch [OK].
The NTP server address is set.

Konica Minolta BIZHUB C351 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Size	11 x 17 inches
Scanner Type	Color Flatbed Scanner
Connectivity	Ethernet, USB