Konica Minolta C200 - Scan to E-Mail

Created by Hotline Support
Konica Minolta Hotline Support (UK)
18
SCAN TO E-MAIL
1) Using Internet Explorer, type the IP address of the Konica Minolta machine into
the address bar and press Go
2) Log in to Administrator Mode using the default password of: 12345678
3) Under the ‘Maintenance’ screen, click on ‘Machine Setting’
4) Enter an ‘Administrator Name’ and ‘Admin E-mail Address’
5) Click ‘OK’ and ‘OK’ again.
6) Click on the ‘Network’ tab at the top of the screen
7) Down the left hand side of the screen, click ‘Email Setting’, then ‘E-mail TX
(SMTP)’