E-37
Setting a Measurement Condition
Selecting Illuminant 2
5
As explained in “Selecting Illuminant 1”, select the desired illuminant, then press
A.
<Settings>
• Same as those given in “Selecting Illuminant 1”
• To display MI (metamerism index), an illuminant must be selected for ILLUMINANT 2.
Selecting the Observer
6
Turn B to select the desired observer angle, then press A.
<Settings>
• 10°: 10° observer (CIE1964)
• 2°: 2° observer (CIE1931)
To Next Page
Loading...
