E11
Before Using the Instrument
1
Optional Accessories
You may purchase the following accessories if necessary.
Petri Dish Measurement Full Set CM-A205
Petri Dish: CM-A128
Target Mask (for Petri Dish):
CM-A203
Calibration Glass
(for Petri Dish): CM-A212
Used to perform reectance
measurement using a Petri Dish.
Used for calibration for reectance
measurement using a Petri Dish.
Zero Calibration Box: CM-A124 White Calibration Plate:
CM-A210
(with CD-ROM containing calibration
data and data-setting software)
Accessory Case: CM-A193
Used to perform zero calibration. Can be used in place of the built-in
White Calibration Plate to perform
white calibration.
Mini Petri Dish Measurement Full Set CM-A164
Mini Petri Dish: CM-A157
Target Mask (for Mini Petri
Dish): CM-A158
Calibration Glass
(for Mini Petri Dish): CM-A159
Used to perform reectance
measurement using a Mini Petri
Dish.
Used for calibration for reectance
measurement using a Mini Petri
Dish.
Zero Calibration Box: CM-A124 White Calibration Plate:
CM-A210
(with CD-ROM containing calibration
data and data-setting software)
Accessory Case: CM-A193
Used to perform zero calibration. Can be used in place of the built-in
White Calibration Plate to perform
white calibration.
Notes
Instructions and notes regarding the use of the Mini Petri Dish CM-A157 and its accessories are the same as for the
Petri Dish CM-A128 unless otherwise specied.
To Next Page
Loading...
