Konica Minolta cm-5 - Page 144

E142
2. Use the or and or buttons of the cross key
to move the cursor to “Output” and then press the [OK/
Edit] button.
The <Output Settings> screen is displayed.
3. Use the or button of the cross key to move the
cursor to “USB Memory Stick Settings” and then press
the [OK/Edit] button.
The <USB Memory Stick Settings> screen is displayed with
a currently-specied le format.
4. To change the le format, press the [OK/Edit] button.
The <Data File Format Settings> screen is displayed.
5. Use the or button of the cross key to move the
cursor to the desired item.
Settings
 CM-S100w:
Binary format which can be read with the optional Color
Management Software SpectraMagic™ NX
 C S V 1 :
CSV format using “,” for a separator and “.” for a decimal
point.
 C S V 2 :
CSV format using “;” for a separator and “,” for a decimal
point.
6. Press the [OK/Edit] button.
The selection is conrmed and the screen returns to the <USB
Memory Stick Settings> screen.
Notes
If you press the [Back] button without pressing the [OK/
Edit] button, you return to the <USB Memory Stick
Settings> screen without changing the setting.
7. Press the [Back] button twice to return to the <Sample>
screen.