Power supply
2
2-18 bizhub C754/C654
2.3
About This Machine Chapter 2
2.3.2 Operating the Power key
When not operating this machine for a long period of time, for example, after working, press the Power key
to shift to the power save mode.
The machine mode changes to the following different modes depending on how the Power key is pressed.
Pressing the Power key during operation changes to the Sub Power OFF mode. Holding down the Power
key changes to the ErP Auto Power OFF mode.
In either case, press the Power key again to turn the power on.
2.3.3 Power save function
When a specified amount of time (default setting: 15 minutes) has elapsed without the machine being oper-
ated, the Touch Panel will go off, and it automatically enters the power save mode. The Power key flashes
blue in the power save mode. The power save mode returns to the normal mode by pressing any key on the
Touch Panel or Control Panel.
There are two power save modes: the low power mode and the sleep mode. Sleep mode provides a greater
power saving effect than Low Power mode. However, the time required to return to Normal mode is longer
than the time required to revert to Low Power mode.
d Reference
The time required to shift to each mode can be changed in the Administrator Settings. For details, refer to the
User's Guide CD.
Status of this machine Description
Power OFF Sub Power
OFF
While the sub power is turned off, this machine can receive data or
faxes, however, it cannot scan or print an original. If data or faxes are
received while the sub power is turned off, they are printed when the
sub power is turned on.
The key lamp lights up orange.
ErP Auto
Power OFF
This machine is placed in the standby mode with a lower power con-
sumption than the Sub Power OFF mode.
In ErP Auto Power Off mode, this machine cannot receive data or fax-
es, and it also cannot scan or print an original.
The key lamp flashes orange.
Power ON The key lamp lights up blue.
The power is returned immediately by pressing any key on the Touch
Panel or Control Panel even when the Control Panel is off.
To Next Page
Loading...
Need help?
General
