Konica Minolta magicolor 8650DN Installation Manual

E-13
12. Touch “Copy”, select “A3 /11×17 ”, and
press the start key.
A test pattern will then be produced on the
A3 or Ledger paper.
13. Place the test pattern face down on the original
glass.
14. Place about ten sheets of A3 or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
15. Press the start key.
The machine will start reading the test pattern.
16. When the machine completes reading the test
pattern, the “Gradation Adjust” screen will reap-
pear.
17. Repeat steps from 12 through 15 to let the
machine read the test pattern two times.
18. Touch “END.”
<If A4 or Letter paper is set in step 1>
6. Touch “Print”, select “A4 /8
½×11 ”, and
press the start key.
A test pattern will then be produced on the two
A4 or Letter papers.
7. Place the test pattern face down on the original
glass.
8. Place about ten sheets of A3 or Ledger
paper on the test pattern placed on the original
glass.
Lower the cover.
9. Press the start key.
The machine will start reading the test pattern.
10. When the machine completes reading the test
pattern, the “Gradation Adjust” screen will reap-
pear.
11. Repeat steps from 6 through 9 to let the
machine read the test pattern two times.
A2X0IXC028DA
Cyan
A2X0IXC027DA
A2X0IXC029DA
Magenta
A2X0IXC027DA

Konica Minolta magicolor 8650DN Specifications

General

Brand	Konica Minolta
Model	magicolor 8650DN
Category	All in One Printer
Language	English