Need help?Do you have a question about the Kontron CRTtoLCD-7 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Display Size | 7 inch |
| Input Signal | Analog RGB |
| Backlight | LED |
| Power Supply | 12V DC |
| Dimensions | 180 x 120 x 30 mm |
Provides information about copyright, trademarks, and general disclaimers of the manual.
Details the product warranty terms, repair process, and exclusions.
Summarizes the key features and technical specifications of the CRTtoLCD-7 controller.
Covers jumper settings for Panel Vcc and Backlight modes.
Explains jumper settings for controlling backlight ON/OFF polarity.
Details pinouts for 4-pin and DC-jack power connectors.
Describes pinouts for VGA/RGB and YUV analog input connectors.
Details pinouts for DVI and SVHS video input connectors.
Covers pinouts for composite, IR, and OSD keypad connectors.
Details pinouts for serial OSD and additional keypad connectors.
Describes pinouts for LVDS interface connectors.
Details pinouts for the JILI30 intelligent LVDS interface connector.
Covers pinouts for panel interface and backlight connectors.
Details pinouts for expansion, GPIO, and sensor connectors.
Describes pinouts for the ADC input connector (Light Sensor Input).
Introduces the OSD Main Menu and basic navigation methods.
Covers selecting input sources for main picture and PIP modes.
Provides settings for image timing and position adjustments.
Details automatic image adjustment and clock settings.
Covers adjustments for phase, bandwidth, and horizontal position.
Explains how to adjust the vertical position of the image.
Details how to adjust brightness and contrast for the main picture.
Covers adjustment of color saturation and hue for the main picture.
Explains fleshtone, backlight, and auto color adjustment features.
Covers gamma correction and color space selection for advanced color.
Details color temperature and individual RGB component adjustments.
Explains adjustment of the blue color component.
Covers settings for motion processing and film mode.
Details adjustments for sharpness and noise reduction.
Explains settings for MPEG processing.
Covers video brightness and contrast adjustments.
Details video saturation and hue adjustments.
Explains video sharpness adjustment.
Covers multimedia specific motion processing and film mode.
Details enhancer, sharpness, and cross color settings for multimedia.
Covers multimedia noise reduction and external deinterlacer settings.
Covers selecting scaling modes and flipping the picture.
Details zoom and pan controls for image scaling.
Covers OSD timeout, position, and transparency settings.
Details OSD orientation, language, and reset to default options.
Covers volume, balance, and surround sound settings.
Details loudness and pseudo stereo effect settings.
Covers audio mode selection and equalizer setup.
Covers TV program, channel, and frequency management.
Details TV system norms, favorites, and auto install features.
Covers selecting radio stations and frequencies.
Details scanning for and saving radio stations.
Covers serial OSD connection and basic configuration settings.
Details input selection for main and PIP via serial OSD.
Covers PIP and VGA settings via serial OSD.
Details basic and advanced color settings via serial OSD.
Covers video processing and scaling settings via serial OSD.
Details audio and TV settings via serial OSD.
Covers OSD menu position, timer, blend, and save settings.
To Next Page