Kontron CRTtoLCD-7 - MPEG Processing; Decoder Settings; Brightness and Contrast Settings

TVtoLCD User´s Guide
On Screen Display
28
5.6.5 Video Settings – Mpeg Processing
The level for the “Mpeg Processing” is set here.
The range of adjustment is 0 to 15. The default
vaulue is 0.
figure 34: Video Settings – Mpeg Processing
5.7 Video Settings – Decoder Settings
In this section several settings for the “Video
Decoder” can be set.
figure 35: Video Settings – Decoder Settings
5.7.1 Decoder Settings – Video Brightness
The level for the “Video Brightness” is set here.
The range of adjustment is 0 to 100. The default
value is 50.
figure 36: Decoder Settings – Video Brightness