Kontron CRTtoLCD-7 - Panel Interface and Backlight Connectors

TVtoLCD User´s Guide
Connectors
13
4.14 FLEX32 CN7003
This connector directly matches through an interface cable for 31/41 pin VGA/SVGA
TFT interface. All flat screen signals are LVTTL compatible (3.3V )
Flatfoil Connector 32 Contacts, Right Angle, Bottom Contact
Case/Size : 0,5mm Pitch, Series : 6210 / ZIF
Description Name Pin Pin Name Description
Power Ground GND 1 O O 2 SCLK Data clock
Latch pulse LP
3 O O 4
FLM First Line Marker
Power Ground GND
5 O O 6
P0 Panel Data R0
Panel Data R1 P1
7 O O 8
P2 Panel Data R2
Panel Data R3 P3
9 O O 10
P4 Panel Data R4
Panel Data R5 P5 11 O O 12 GND Power Ground
Panel Data G0 P6 13 O O 14 P7 Panel Data G1
Panel Data G2 P8 15 O O 16 P9 Panel Data G3
Panel Data G4 P10
17 O O 18
P11 Panel Data G5
Power Ground GND
19 O O 20
P12 Panel Data B0
Panel Data B1 P13
21 O O 22
P14 Panel Data B2
Panel Data B3 P15 23 O O 24 P16 Panel Data B4
Panel Data B5 P17 25 O O 26 GND Power Ground
Data Enable MOD ( DE ) 27 O O 28 PANEL_VCC Panel Power
Panel Power PANEL_VCC
29 O O 30 R/L Right/Left
Up/Down rotate U/D 31 O O 32 NC Not connected
4.15 Backlight Connector CN7001
Connector: Molex 53261-1071
Matching Connector: Molex 51021-1000
Connector Single Row, 10 Contacts, Case/Size : Right Angle, 1,25mm
Pitch
Pin
Name Description
O
1
BLON
BACKLIGHT CONTROL SIGNAL (TTL, REFER TO
JP7003)
O
2
GND
Power Ground
O
3
GND
Power Ground
O
4
Backlight power supply
O
5
Backlight power supply
O
6
Backlight power supply
O
7
Backlight power supply
TYPICAL. +12V (NOTE SAME AS DC INPUT
VOLTAGE , 1 AMPERE PER CONTACT ALLOWED)
O
8
GND Power Ground
O
9
GND Power Ground
O
10
BKLTADJ analog 0V to +5V or 0V to +12V (refer to
JP7001)