Kontron CRTtoLCD-7 - Audio Mode and Equalizer Settings

TVtoLCD User´s Guide
On Screen Display
39
5.11.6 Mode
In this section three different audio modes can be
selected. The user can choose between “Mono”,
“Stereo” and “SAP” (second audio source). By
default the audio mode is set to “Stereo”.
figure 65: Audio Settings - Mode
5.11.7 Equalizer
In this section the “Equalizer” can be set up. The
quota of the different frequencies can be defined
here. By default all values are set to a medium
level.
figure 66: Audio Settings - Equalizer