5.6.2 Video Settings – Sharpness
The “Sharpness” of the video signal is set here.
The range of adjustment is -15 to 29. The dafault
vaule is 0.
figure 31: Video Settings – Sharpness
5.6.3 Video Settings – Film Mode
The “Film Mode” can be switched on or off here.
As dafault the film mode is turned on.
figure 32: Video Settings – Film Mode
5.6.4 Video Settings – Noise Reduction
The level of “Noise Reduction” is set here. The
range of adjustment is 0 to 6. The default value is
2.
figure 33: Video Settings – Noise Reduction
To Next Page