KT965 Family
KTD-00699-S Public User Manual Date: 2010-04-15 Page 48 of 90
4.13 The Clear CMOS Jumper, Clr-CMOS.
The Clr-CMOS Jumper is used to clear the CMOS content.
↑ CPU location ↑
No Jumper installed 1 2 3 (Pin numbers)
Jumper normal position
•
Jumper in Clear CMOS position
•
To clear all CMOS settings, including Password protection, move the CMOS_CLR jumper (with or without
power on the system) for approximately 1 minute.
Alternatively if no jumper is available, turn off power and remove the battery for 1 minute, but be careful to
orientate the battery correctly when reinserted.
To Next Page
Loading...
