Kontron MSH8900 - Configuring Shelf Managers; Set up Access to the Shmc

MSH8900
www.symkloud.com // 48
ShMC CLI (serial, SSH)
ipmitool> set targetaddr <ipmi address>
Note
To break the connection and go back to the initial component, reestablish a connection with the
initial component.
3.4. Configuring Shelf Managers
3.4.1. Set Up Access to the ShMC
To access the ShMC CLI using the Ctrl+g 0 command (Figure 14 or Figure 15):
1.
2. Release both keys
3.
4. Press the Enter key and release it
Hint: It is preferable to use the Ctrl key located on the left of the keyboard.
Log in to the ShMC CLI using the default credentials user: admin and password: admin.
COMMAND
PURPOSE
Ctrl+g 0
MSH8900 Login: admin
Password: admin
ipmitool>
Use HOTKEY to redirect the serial console
multiplexer to the ShMC CLI.
The ipmitool> prompt means the ShMC was
reached.