Kontron MSH8900 - 1; Product Description; Product Overview; Table 1: MSH8900 Features

MSH8900
www.symkloud.com // 9
1/ Product Description
1.1. Product Overview
MSH8900 hubs are modules for the SYMKLOUD MS platforms. Two hubs can be installed in each MS2900 series
platform and one in each MS1300 series platform.
Table 1: MSH8900 features
Component
Description
Switching capabilities
Managed switch with (per hub):
 MS2900: 22x 1 Gbps and 2x 10 Gbps
 MS1300: 16x 1 Gbps and 2x 10 Gbps
Redundant switching in dual hub configuration
Full featured Layer 2 switching
Stacking up to 16 MSH8900 in MS2900
Layer 3 IPv4/IPv6 routing
Multicast support (IPv4, IPv6, IGMP and MLD)
Shelf Management
Controller (ShMC)
capabilities
Battery backed central time source for MS platform
Cooling management
Power management
Platform LED control
Platform monitoring
FRU activation management
MSU8700 configuration in MS2900 platforms
Comprehensive sensor network and event monitoring
Remote management
IPMI 2.0 (including IOL, SOL)
RESTful API
SNMP
Firmware upgrade
Sensor and event aggregation for hubs and MSP nodes
Hot swap monitoring for hubs and MSP nodes
Hot swap
Supported
Refer to Section 4.1.1 for a description of hub behavior during a hot swap procedure
Power consumption
MSH8900 (with 2 optical SFP+ modules): 15.6 W typical
MSU8700 (with 2 optical SFP+ modules): 5.3 W typical
Battery
RTC supply, user-replaceable battery, model BR2032
Power management
Support of IEEE 802.3az Energy Efficient Ethernet idle link standards
For a complete list of MS platform features, refer to SYMKLOUD documentation at Symkloud.com.