Kontron MSH8900 - Page 70

MSH8900
www.symkloud.com // 70
ID
Sensor Name
Description
Sensor Type
Code
Reading
Type Code
Event Offset
75
ShMC Storage
Err
Management
subsystem
health
(non volatile
memory error)
28h
(Management
Subsystem
Health)
6Fh
(Sensor
Specific)
Only offset 1 is used
See IPMI v2.0 table
42-3, Sensor type
code 28h for sensor
definition
76
ShMC SEL
State
Specify the
status of the
SEL
(Cleared/Almost
full/Full)
10h
(Event Logging
Disable)
6Fh
(Sensor
Specific)
Only offset 2,4,5 are
used
See IPMI v2.0 table
42-3, Sensor type
code 10h (Event Log
Disable) for
sensor definition
77
SEL Time Set
Specify when
SEL time change
12h
(System)
6Fh
(Sensor
Specific)
Only offset 5 is used
See IPMI v2.0 table
42-3, Sensor type
code 12h for sensor
definition
78
Jumper Status
Reflects on-
board jumper
presence
D3h
(OEM Jumper
Status)
6Fh
(Sensor
Specific)
Offsets 0 to 14 are
used
See OEM table,
Sensor type code
D3h (Kontron OEM
Jumper Status)
for sensor definition
79
IPMI Info-1
Internal
Management
Controller
firmware
diagnostic
C0h
(OEM
Firmware Info)
70h
(OEM
Kontron
Internal
Diagnostic)
See OEM table,
Sensor type code
C0h (Kontron OEM
Firmware Info)
for sensor definition
and
Event/Reading type
code 70h
(Kontron OEM
Internal Diagnostic)