11
2、Connecting the water drain pipe
Screw the white drain pipe assembly in the attachment into the drain of the ice bin,and
connect the other end of the white drain pipe assembly to the sewer pipe.
3. The ice maker is connected to the drain of the ice bin
When the host is placed on the cabinet, the drain (position A shown below) of the host needs to be
connected with the hole of the drain baffle on the cabinet (lower Picture B position).
4. Connect the water hose to the water faucet of the water main supply system
First, install the supplied water quick-connector to the water faucet by screw thread; Second,
remove the clipper from the water quick-connector, insert the another end of the water hose into
this quick-connector port completely, then install back the clipper, also this step is completed.
Note: The water faucet should be supplied by the customer himself.
Important: The water pressure of main water supply system must be 0.04-0.6 MPa at least.
STEP 1:Qucik-connector
and the water faucet
STEP 2:Screw the qucik-connector on the
water faucet by the screw thread, and
remove the clipper
STEP 3:Insert the water hose completely
STEP 4:Install back
the clipper
Push inwards
Remove the
clipper
ice bin
white color
water drain pipe
To Next Page
Loading...
