EasyManua.ls Logo

Korg EK-50L - Song Mode Playback and Editing; Loop Playback Features; Editing User Songs

Korg EK-50L
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Song mode
19
Playing back part of a song in a loop
This feature lets you play back part of a song over and over (loop
playback).
Quick loop playback
Press the LOOP buon to loop the playback of the current
measure. (For MP3 and WAV les, playback will be looped
from 1 second prior to the point where the LOOP buon was
pressed.)
(MP3, WAV)
1 measure
1 sec.
1.
Press the start/stop buon to play back the song.
2.
Press the LOOP buon at the measure (position) where
playback will loop back (the buon will light up green).
Tip:
The loop can be extended to play back for a maximum
of 9 measures before (or 9 seconds before, in the case of MP3
and WAV les). Use the dial during loop playback to extend
the length of the loop.
3.
To cancel loop playback, press the LOOP buon again.
The instrument will return to normal playback, and the
buon will go dark.
A–B loop playback
Use the A1 B buon to specify a part of a song to play back in
an A–B loop.
1.
Press the start/stop buon to play back the song.
2.
Press the A1 B buon at the start of where you want to
begin the loop (the buon will blink green).
3.
Press the A1 B buon again at the end of where you want
to end of the loop (the buon will light up green).
This will play back the song in a loop between points A and
B.
4.
To cancel the loop playback, press the A1 B buon.
The instrument will return to normal playback, and the
buon will go dark.
Editing a song
You can edit the user songs.
Erasing part of a recording (erase function)
Here’s how to erase part of what you played using the keyboard
part in a user song.
Note:
This will erase a specied range for the keyboard part,
whether it is muted or not.
1.
Select a user song.
2.
Press the start/stop buon to play back the song.
3.
Press the ERASE buon at the point where you want to
start erasing (the buon will light up red).
4.
Press the ERASE buon again at the point where you want
to stop erasing (the buon will go dark).
Tip:
To erase a dierent part, press the start/stop buon to
stop playback, and go to step 2 to erase.
Erase
Erase On Erase Off
Upper 1 MIDI ch 1
Upper 2 MIDI ch 2
Upper 3 MIDI ch 3
Lower MIDI ch 4
Bass MIDI ch 9
Drum MIDI ch 10
Percussion MIDI ch 11
Other Parts MIDI ch 12-16
Part
2,3
1
BA
2,3,4
1
2,31

Table of Contents

Related product manuals