Korg EK-50L - SETTING Functions - Parameter List (continued); Additional SETTING Parameters

SETTING functions
23
Page Parameter Seings Contents of seings
User C Tune –
User B Tune
‑99... +00* ... 99 Cent This is displayed when “User” is selected for “P.08 UpperScaleTyp” or “P.09
StyleScaleTyp”.
This indicates the amount of detuning compared to standard equal temperament
tuning. These seings aect the entire tonal range.
±50: Moves the tuning up or down 1/4 (quarter) tone.
±99: Moves the tuning up or down nearly one semitone.
P.10 Tap Auto Start Disable
Enable*
Pressing TAP TEMPO/[TEMPO LOCK] buon continuously will set whether
performance begins automatically or not.
P.11 MIDI Clock Internal*
External
Sets whether the MIDI clock of this instrument is controlled by the internal clock
(Internal) or by an external clock (External).
P.12 Local Control O
On*
Sets whether the sound generator of this instrument will play or not (“On” to play, “O”
to not play) when the keyboard is played.
On: Notes that you play on the keyboard and MIDI data will be sent to the internal
sound generator and to the USB TO HOST port.
O: Notes that you play on the keyboard and MIDI data will be sent to the USB TO
HOST port, but the internal sound generator will not sound. Turn this seing to “O”
when this instrument is connected to a computer that is set to echo back and when
you want to use this instrument as a sound generator, in order to prevent notes from
sounding in duplicate.
P.13 Audio In Level 0 ... 100* ... 127 Sets the input level from audio devices connected to the AUDIO IN jack.
P.14 Auto PowerO
Disable,
5, 10, 30*, 60,
120 Minutes
See page 21 “Changing the auto power‑o function”.
P.15 Baery Type Alkaline*
Ni-MH
See page 21 “Seing the baery type”.