Korg Kaossilator Pro+ - Getting Ready; Connections Guide

6
Getting ready
Connections
MIXER, DJ MIXER
AC
CD PLAYER
AC ADAPTER
Connecting your monitor amp or mixer to the
output jacks
Connect the KAOSSILATOR PRO+’s LINE
OUT jacks to your mixer or powered monitors
(amplied speakers).
If you’re using headphones, connect them to
the PHONES jack.
TIP: The KAOSSILATOR PRO+’s sound will still be
output from the LINE OUT jacks even if headphones
are connected.
Connecting your mic or audio source to the in-
put jacks
If you’re using a mic, connect it to the MIC jack.
If you want to connect a sampler or other audio
source device, connect its output jacks to the
KAOSSILATOR PRO+’s LINE IN jacks.
Always connect devices with the power turned off. Care-
less operation can damage your speaker system or cause
malfunctions.
If you are not using a mic, turn the MIC TRIM knob all the
way down.