Parameters of each mode
60
Performance Parameter
Here you can edit the program’s output level, pan, and out-
put destination.
IFX........................................................................[OFF, ON]
This switch acts as a bypass, turning the entire insert effect
section on/off.
OFF (dark): The insert effects will not be heard (bypassed).
ON (lit): The insert effects will be heard (active).
Menu Commands
You can click the “▼” located at the right of “IFX” and
choose one of the following commands.
Load
Lets you select a program.
The browser will appear in the same way as when you click
the [BROWSER] switch. (☞ “The Browser” on page 16)
Write
Writes (stores) edited or created program data into the M1
software synthesizer’s internal memory.
☞ “Writing to internal memory” on page 69.
Search Similar Program
The browser will appear with the same instrument and
sound character search settings as the currently-loaded pro-
gram. This is a useful way to find another sound that’s simi-
lar to the currently selected one. (☞ “The Browser” on page
16)
Copy
Copies the settings of the currently selected program to the
clipboard.
Settings not written to internal memory will not be
copied.
Paste
Pastes the program settings that were copied to the clip-
board. When you execute the Paste command, any settings
that had not been copied will be initialized.
Menu Commands
To Next Page
Loading...
Need help?
General
