Writing, saving, and loading data
74
Loading data from your
computer
[FILE] button
1. Click the [FILE] button located in the upper left of the
screen in each mode. From the menu that appears,
choose “Load” and select the data that you want to
load.
All Data…
The parameters of all modes, the Master Volume setting,
and all user data (combinations, programs, and drum
kits) will be loaded. The filename extension will be
“.fxb” (bank data) or “.m1all” file (all data).
1 Combination…
The parameters of one Combination will be loaded.
These files have an extension of “.m1combi”.
1 Multi…
The parameters of one Multi will be loaded. These files
have an extension of “.m1multi”.
1 Program…
The parameters of one program will be loaded. These
files have an extension of “.m1prog”.
2. In the dialog box that appears, choose the location of the
file, the type of file, and the file name. Then click the
[Open] button to load the file.
File menu
Load bank (.fxb files)
1. From the file menu located in the upper left of the
screen, choose “Load Bank...”.
2. In the dialog box that appears, specify the file location,
the file name, and click the [Open] button.
The parameters of all modes, the Master Volume setting,
and all user data (combinations, programs, and drum
kits) will be loaded.
Load program (.fxp files)
1. From the file menu located in the upper left of the
screen, choose “Load Program...”.
2. In the dialog box that appears, specify the file location,
the file name, and click the [Open] button.
The parameters of one program will be loaded.
KORG logo menu
Loading MIDI control change assignments
1. Click the KORG logo located in the upper right of the
screen, and choose “Load Controller Map…” from the
menu that appears.
2. In the dialog box that appears, specify the file location,
the file type, the file name, and click the [Open] button.
The MIDI control change assignment file will be loaded.
To Next Page
Loading...
Need help?
General
