Korg M1 - MIDI Setting

Global mode
65
MIDI SETTING
GLOBAL MIDI CHANNEL
MIDI CHANNEL...................................................... [01…16]
Specifies the global MIDI channel.
The global MIDI channel is used for several purposes. In
Combination mode, it’s used as the channel for changing
from one combi to another, and for controlling the master
effects (the rotary speed when “EFFECT TYPE” is Rotary
Speaker ☞p.33). In Multi mode, it’s used as the channel for
controlling the master effects. In Program mode, it’s used as
the channel that will play the program and for controlling
the insert effects (the rotary speed when “EFFECT TYPE” is
Rotary Speaker ☞p.33).
GLOBAL PITCHBEND
GLOBAL PITCHBEND ................................[DISABLE, ENABLE]
DISABLE: The individual program parameter CONTROL
page “PITCHBEND” settings in each mode will be used.
ENABLE: The “RANGE” setting you make here will be used
for every program in every mode.
RANGE...............................................................[–12…+12]
Specifies the pitch bend range. If “GLOBAL PITCHBEND”
is set to ENABLE, this setting will be used for every pro-
gram in every mode.
MIDI FILTER
You can filter out certain types of MIDI messages, to prevent
them from being received by the M1 software synthesizer.
Set the filter to “ON” if you do not want to receive that type
of MIDI message.
You can use multiple filters at the same time.
CONTROL CHANGE FILTER ....................................[OFF, ON]
Specifies whether MIDI control change messages will be
received. Turn this on to prevent from receiving these mes-
sages.
OFF (dark): Receive.
ON (lit): Don’t receive.
COMBI/PROG CHANGE FILTER ..............................[OFF, ON]
Specifies whether combination changes and program
changes will be received. Turn this on to prevent from
receiving these messages.
OFF (dark): Receive.
ON (lit): Don’t receive.
AFTER TOUCH FILTER.............................................[OFF, ON]
Specifies whether aftertouch will be received. Turn this on to
prevent from receiving these messages.
OFF (dark): Receive.
ON (lit): Don’t receive.