Name: Korg M1
Brand: Korg
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Combination mode

PRE LEQ................................................ [–15…+00…+15dB]

This EQ control will boost or cut the low frequencies of the

input signal, before the compressor.

PRE HEQ............................................... [–15…+00…+15dB]

This EQ control will boost or cut the high frequencies of the

input signal, before the compressor.

DRY/WET ..........................................[DRY, 001…099, WET]

Adjusts the balance of the processed sound and the direct

sound.

Using MIDI control change messages to control the

speed of the Rotary Speaker

When you’re using the Rotary Speaker as master effect, you

can use MIDI control change messages to switch the speed

of rotation.

Transmitting CC#76 (Vibrato Rate) with a value of 64–127

from your external MIDI device on the Global MIDI Chan-

nel (☞ “MIDI CHANNEL” on page 66) will switch the

rotary speed to Fast; transmitting a value of 00–63 will

switch to the Slow speed.

Other manuals for Korg M1

Questions and Answers:

Need help?

Do you have a question about the Korg M1 and is the answer not in the manual?

General