Writing to internal memory
71
Program mode
1. Click the [WRITE] button located in the upper left, and
choose Selected Program from the menu that appears.
The WRITE PROGRAM dialog box will appear with the
instrument and sound character that are specified for
the program selected.
You can also access the WRITE PROGRAM dialog box
by choosing the menu command Write.
2. Select the writing-destination card.
Click one of the [USER1]–[USER4] buttons shown at the
bottom of the screen.
3. If you want to change the name before saving, double
click on the program name displayed at the top of the
window, and using your computer’s keyboard, type in a
name and press the [Enter] key.
4. Select the type of instrument in the SEARCH “INSTRU-
MENTS” area, and the character of the sound in the
“CHARACTER” section.
You may choose multiple items in the instrument and
character sections by holding down the [Shift] key on
your computer.
5. Select the writing-destination number.
6. Click the [OK] button.
The program will be written to the user card you chose
as the writing-destination.
Drum Kits
Drum kits you created or edited in Combination, Multi, or
Program mode can be written (stored) to a user card in the
M1 software synthesizer.
The M1 software synthesizer provides two internal “user
cards” for storing drum kits. Since each card holds 20 drum
kits, this gives you a total of 40 drum kits stored within the
M1.
Settings that are remembered when you Write
OSC page DRUM KIT EDIT section parameters other than
KBD CHASE will be remembered when you Write.
To Next Page
Loading...
Need help?
General
