Korg PA 600 QT User Manual

38
Playing Sounds
Changing the split point
Changing the split point
If you are not comfortable with the selected split point, you may set the split point to a different key.
1 Touch the Split tab to see the Split Point panel.
Hint: As an alternative,
keep the SHIFT button
pressed, and press the SPLIT
button to open the Split Point
dialog.
2 Touch the keyboard in the display, then play the lowest note of the Upper section on
the keyboard.
3 As an alternative, touch the Split Point parameter to select it, and use the VALUE dial to
select the new split point.
There is no need, at the moment, to uncheck the “Global” parameter. Just keep in mind that,
when this parameter is checked, the split point will change globally.
i
Lower
Upper

Korg PA 600 QT Specifications

General

Brand	Korg
Model	PA 600 QT
Category	Electronic Keyboard
Language	English