78
Recording a new Song (Standard MIDI File)
Second-take recording (Overdubbing)
Second-take recording (Overdubbing)
You may wish to re-record, and add one of the two “grouped” tracks, or overwrite a bad recording
with a new one. Usually, you will record all chord and Style Element changes during the first take, and
record Keyboard tracks and Pads during the second take.
1 Press the RECORD button to enter Record mode again. When the Song Record Mode
Select dialog box appears, select Backing Sequence (Quick Record) again.
2 If you are recording just one of the “grouped” tracks, set the track to be preserved to
the Play mode.
3 Repeat the recording process, and press the (PLAY/STOP) button in the PLAYER
section to stop recording and to return to the main page of the Sequencer mode.
4 While in the main page of the Sequencer mode, press the (PLAY/STOP) button in
the PLAYER section to listen to the recorded Song.
Again, the Backing Sequence Song has been converted to an ordinary Song.
Saving a Song
After recording a Song that you like, it is a good idea to save it, to avoid losing it when the instrument
is turned off (or put in standby).
1 While in the main page of the Sequencer mode, touch the page menu icon to open the
page menu.
To Next Page
Loading...
