77
Recording a new Song (Standard MIDI File)
Recording
Quick Guide
Recording
1 Select the Style Element you wish to use before starting to play.
2 Start recording, by pressing the START/STOP button.
Note: If you do not wish
to start the Song with the
Style playing, you can simply
start recording by pressing
the PLAY/STOP button
in the PLAYER section, and
start the Style only later. The
Style will start at the begin-
ning of the next measure.
3 Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Break, Ending…) you like. You can
also press START/STOP to stop the Style, and press it again to start the Style up again!
Please remember that, while recording in Backing Sequence Record mode, you cannot use the
SYNCHRO, TAP TEMPO/RESET, BALANCE controls.
4 When finished recording your Song, press the (PLAY/STOP) button in the PLAYER
section to exit recording, and return to the main page of the Sequencer mode.
5 While in the main page of the Sequencer mode, press the (PLAY/STOP) button in
the PLAYER section to listen to the recorded Song.
The Backing Sequence Song has been converted to an ordinary Song (in Standard MIDI File, or
“MID”, format). If you like it, you can save it, and read it in Song Play mode, or with any external
sequencer.
6 To edit the Song, press MENU to enter Edit mode.
Select any of the Variations before starting to record.
Select one of the Intros to start with an introduction.
i
After pressing the PLAY/STOP button, the main
page of the Sequencer mode will appear again.
To Next Page
Loading...
Need help?
General
