Korg PA 600 QT User Manual

46
Selecting and playing Styles
Selecting and playing a Style
2 Select a Style from the Style Select window.
Note: Selection windows
may automatically close
after a selection. To do this,
uncheck the “Display Hold”
box in the Global > General
Controls > Interface page. In
this case, press the EXIT but-
ton only if you don’t make
any selection but want to
close the window.
3 Be sure the ACCOMP. LED is turned on.
4 Press the SYNCHRO-START/STOP button to turn the START LED on.
This will turn the Synchro-Start function on, and let the accompaniment start as soon as you
play a chord on the keyboard.
Note: You could simply
press START/STOP to start the
Style, but the Synchro-Start
function allows you to make
the Style start in sync with
your playing on the key-
board. Therefore, it may be
considered a “more musical”
way of starting a Style.
5 Play the keyboard.
Note: The chord scan
area depends on the status of
the SPLIT LED and the Chord
Recognition parameter
(Global > Mode Preferences >
Style).
6 Press START/STOP to stop the Style.
After pressing the EXIT button, the Style Select window
closes, and the main screen appears again, with the selected
Style ready to go.
i
For the accompaniment tracks to play, the LED of
this button (meaning “Accompaniment”) must be
turned on.
i
START LED
STOP LED
When the Syncho-Start function is turned on, the Style starts
playing as soon as you play a note or chord in the chord scan area.
Play chords with your left hand, and the melody with your right
hand. The arranger will follow your playing.
i

Korg PA 600 QT Specifications

General

Brand	Korg
Model	PA 600 QT
Category	Electronic Keyboard
Language	English