142
2) Load Programs: selected icon
All program data from a .PCG file will be loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
3) Load Program Bank [A...D]: selected icon
All program data of the selected bank will be loaded into the
bank you specify.
1 In “To,” select the loading destination bank.
2 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
4) Load a Program: selected icon
Data for the selected program will be loaded into the pro-
gram number you specify.
1 If you wish to load a program other than the one already
selected, use “From” to select the program that you wish
to load.
2 In “To,” select the bank and program into which the data
will be loaded.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
5) Load Combinations: selected icon
All combinations in the .PCG file will be loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
6) Load Combination Bank [A...C]: selected icon
All combinations in the selected bank will be loaded into the
bank you specify.
1 In “To,” specify the loading destination bank.
2 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
7) Load a Combination: selected icon
The combination you select will be loaded into the loading
destination combination number you specify.
1 If desired, use “From” to re-select the combination to be
loaded.
2 In “To,” select the bank and combination into which the
data will be loaded.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
8) Load Drum Kits: selected icon
All drum kits in the .PCG file will be loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
9) Load Drum Kit [00…15(INT),16…23(User):
selected icon
All drum kit data of the selected drum kit block will be
loaded into the drum kit block you specify as the loading
destination.
1 In “To,” select the drum kit block into which the data will
be loaded.
2 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
10) Load a Drum Kit: selected icon
The selected drum kit will be loaded into the drum kit num-
ber you specify as the loading destination.
1 If desired, use “From” to re-select the drum kit to be
loaded.
2 In “To,” select the loading destination drum kit.
3 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
11) Load Arpeggio Patterns: selected icon
All user arpeggio pattern data in the .PCG file will be
loaded.
1 To load the data, press the [F8] (“OK”) key. To cancel
without loading, press the [F7] (“Cancel”) key.
To Next Page
Loading...
