68
Specifies whether the A- and B-mode operations of REAL-
TIME CONTROLS knobs [1]–[4] will be received. MIDI con-
trol messages are fixed as the A-mode operation of each
knob. In B-mode the knobs correspond to the messages you
assign in the 2.2: Controller Controls page.
4.3–1: M3–1..8 (MIDI Filter3–1 T01...08)
4.3–2: 3–1..16 (MIDI Filter3–1 T09...16)
4.3–3: 3–2..8 (MIDI Filter3–2 T01...08)
4.3–4: 3–2..16 (MIDI Filter3–2 T09...16)
4.3–1(2)a: Real-time Control Knob 1, 2
Knob1 [Off, On]
Specifies whether or not the A-mode MIDI control change
message #74 (this instrument’s low pass filter cutoff fre-
quency) and the B-mode MIDI control change message will
be received.
Knob2 [Off, On]
Specifies whether or not the A-mode MIDI control change
message #71 (this instrument’s low pass filter resonance or
high pass filter cutoff frequency) and the B-mode MIDI con-
trol change message will be received.
4.3–3(4)a: Real-time Control Knob 3, 4
Knob3 [Off, On]
Specifies whether or not the A-mode MIDI control change
message #79 (this instrument’s filter EG intensity) and the B-
mode MIDI control change message will be received.
Knob4 [Off, On]
Specifies whether or not the A-mode MIDI control change
message #72 (the release time of this instrument’s filter and
amp EG’s, release time) and the B-mode MIDI control
change message will be received.
■ 4.3–1(2)b, 4.3–3(4)b: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
4.4–1: M4–1..8 (MIDI Filter4–1 T01...08)
4.4–2: 4–2..16 (MIDI Filter4–1 T09...16)
4.4–1(2)a: SW1, SW2
SW1, SW2 [Off, On]
Specifies whether or not the effect of the [SW1] and [SW2]
keys will be received. The function of these keys can be set
in the 2.2: Controller page. This is valid when the switches
are set to SW1 Mod.(CC#80), SW2 Mod.(CC#81) or
Porta.SW(CC#65).
■ 4.4–1(2)b: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
4.4–3: 4–2..8 (MIDI Filter4–2 T01...08)
4.4–4: 4–2..16 (MIDI Filter4–2 T09...16)
4.4–3(4)a: Foot Pedal/Switch, Other Control
Change
Foot Pedal/Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL/SWITCH will be received. The function of this
switch is set in GLOBAL 1.1: System Foot page. This is valid
when the switch is set to a MIDI control change.
Other Control Change [Off, On]
Specifies whether or not MIDI controller messages other
than those included in MIDI Filter 1–4 will be received.
■ 4.4–3(4)b: UTILITY
☞ “Memory Status,” “Solo Selected Track,” “Rename Song,”
“Delete Song,” “Copy From Song,” “Copy From Combi,”
“Load Template Song,” “Save Template Song,” “FF/REW
Speed,” “Set Location” (1.1–1d)
SEQ 4.3: MIDI Filter3
4.3–1a
1.1–1c
4.3–1b
SEQ 4.4: MIDI Filter4
4.4–1a
1.1–1c
4.4–1b
4.4–3a
1.1–1c
4.4–3b
To Next Page
Loading...
