Technical Specification
PRINTING
Printing Technology: FDM (Fused Deposition Modeling)
Build Size: Ø 180× 300 mm (Ø 230× 300 mm for Linear Plus)
Layer Resolution: 0.1-0.4 mm
Positioning Accuracy: X 0.01mm
Y 0.01mm
Z 0.01mm
Extruder Quantity: Single
Nozzle Diameter: 0.4 mm
Print Speed: 20~80mm/s
Travel Speed: 150mm/s
Supported Print Materials: PLA, ABS, HIPS, Wood
TEMPERATURE
Ambient Operating Temperature: 8ºC - 40ºC
Operational Extruder Temperature: 275ºC
Operational Print Bed Temperature: N/A
SOFTWARE
Slicer Software: Cura
Cura Input Formats: .STL, .OBJ, .DAE, .AMF
Cura Output Formats: GCode
Connectivity: SD Card, USB Port (expert users only)
ELECTRICAL
Input Rating: 100-240V AC, 50/60Hz, 1.5A
PHYSICAL DIMENSIONS
Printer Dimensions: 315mm (Δ) × 680mm (Height)
380mm (Δ) × 680mm (Height) for Linear Plus.
Weight: ~5kg-Pulley, ~6kg-Linear, ~6.8kg-Linear Plus
To Next Page
Loading...