Need help?Do you have a question about the Kossel Linear Plus and is the answer not in the manual?
Critical safety guidelines for operating the 3D printer, covering temperature, moving parts, and environmental factors.
Details on printing technology, build size, resolution, accuracy, nozzle, and speed.
Operating temperature ranges for the ambient environment, extruder, and print bed.
Information on compatible slicer software, file formats, and connection options like SD card and USB.
Covers input power rating, printer dimensions, and weight for setup and understanding.
Details on the mechanical components and their assembly, including frames, effector, and motion systems.
Covers the electronic components, mainboard, LCD, and platform wiring and installation.
Guides through driver installation, firmware uploading, and parameter configuration for operation.
Provides answers to common questions and troubleshooting steps for various printer issues.
General| Filament Diameter | 1.75 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Technology | FDM |
| Feeder System | Bowden |
| Frame Type | Delta |
| Heated Bed | Yes |
| Display | LCD |
| Software | Repetier-Host, Cura |
| Print Bed Material | Aluminum |
| Frame | Aluminum |
| Supported Materials | PLA, ABS, PETG |
| Printing Speed | 20 - 150 mm/s |
To Next Page
