KPM KB2 - 4 Operation and Configuration; Display and Operating Keyboard

4. Operation and configuration
4.1. Display and operating keyboard
Break
detected
ENTER
SAMPLE
ESC
ON
B
R
R/B
1.83
3.05
K
K
O
OFF
Fig. 4.1. Display and keyboard.
The display contains 7 lines, with 21 characters in a line. The main display (fig. 4.1) shows:
– Selected measurement signal for break detection.
– Signal level of the selected signal.
– Time.
– Break status.
– Alarms, if activated.
Common properties in other menus:
– Selected line highlighted
– Upper right corner shows:
* Number of lines/pages in that menu.
* Arrow shows, if hidden lines.
– Help menus in bottom.
Keyboard
– ON/OFF button: Switch the mains on/off.
– Arrows: Scroll the menus and rows or adjust values.
– Esc: Delete changes and/or return back to the previous menu.
– Enter: Accept data and input changes.
– Sample: Averages the measured values. After sampling the program asks if the values will be
stored for Break or Paper Reference values or deleted.
Fig. 4.2. Main display and main menu.
KB² Man W41100099V1.212August 2012