Viewing Current Analog I/O Configuration and Preset Name
On the top pane of the webpage, shows the analog I/O setup, the preset name, and the status
of the setup.
The indication light displays:
To save a modified preset (yellow indication light):
1. Click the preset status area. The A/V settings page appears (see Audio and Video
Settings on page 39, Figure 48).
2. Follow the instructions in Defining Audio Settings on page 39.
Changing Security Settings
You can easily disable or enable the webpages security using the lock icon. When security is
disabled, you do not need to enter a password to access the webpages. When security is
enabled, you do. For information about the default login credentials, see Default
Communication Parameters on page 54. For information about changing the default login
credentials, see Setting Access Security on page 47.
To disable security settings:
1. Click the lock icon ( ) indicating that security is enabled.
The following message appears:
Figure 17: Disabling Security Message
2. Type the current password (Admin, by default).
3. Click OK.
Security is disabled.
To Next Page
Loading...
Need help?
General
